M35 Series Double Valve M35S50GAEXACGA

Actual product may differ from above image. Product details should be verified before purchase.
  • Redundant control can achieve Category 4, PL e, when used with proper safety controls
  • Each valve element in the M35 Series is equipped with a solid state pressure sensor for external monitoring
  • Monitoring both of these sensors on each actuation and de-actuation of the M35 Series valve provides a diagnostic coverage up to 99%.
  • Poppet design that is dirt tolerant, wear compensating for quick response and high flow capacity
  • PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
  • Optional Soft-Start Module on energization, allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
  • Modular port connection allows modular connection to Air Entry System (Lockout Valve, FRLs)
  • LED Indicators provides visual display of valve status and aids troubleshooting
  • Include built-in silencer module or threaded flange for remote exhaust
  • SISTEMA Library available for download

Need Help? No Problem!

Technical & Customer Service

+44 (0)1254 872277

Need Help? No Problem!

Technical & Customer Service

+44 (0)1254 872277


Product Information

Series M35
Valve Function Redundant 3/2 Single Solenoid
Construction Dual Poppet
Actuation Electrical
Soft Start Included
Lockout Not Included
Monitoring External
Feedback PNP Solid State Pressure Sensors
Reset Automatic
Basic Size 8
Inlet Size 3/4"
Outlet Size 3/4"
Exhaust Size Built-in Silencer
Thread Type G
Ports 1-2 Flow 4.1 Cv (4034 Nl/min)
Ports 2-3 Flow 7.57 Cv (7449 Nl/min)
Feedback Rating Contacts - 5 amps at 250 volts AC, or 5 amps at 30 volts DC
Voltage 24 VDC
Power Consumption 2.0 watts
Solenoid Connection 5-pin M12
Feedback Connection 5-pin M12
Solenoid/Sensor Pin Configuration AC
Operating Pressure Max (bar) 10
Pilot Supply Internal
Pressure Gauge Analog
Height (mm) 178.7
Length (mm) 80
Width (mm) 109.3
Weight (kg) 3
Mounting Inline
Ambient Temperature Range 40 to 120 F (4 to 50 C)
Media Temperature Range 40 to 175 F (4 to 80 C)
Flow Media Compressed air according to ISO 8573-1 Class 7:4:4
Valve Body Material Cast Aluminum
Poppet/Spool Material Acetal and Stainless Steel
Seal Material Buna-N
Safety Category Category 4
PL Rating PL e
Safety Integrity Level SIL 3
DGUV Certification Yes
CE Certification Yes
EAC Declaration Yes
CSA/UL Certification Yes